PYRAN® Platinum F

Fire- and Safety-Rated Glass-Ceramic

Description

PYRAN® Platinum F is a fire-protection rated and impact safety-rated glazing

material made from a transparent glass-ceramic with a thickness of 3/16"

(5 mm). It has a surface applied 3M Scotchshield* Ultra Film and is intended

for use in safety-rated locations such as door lites, transoms or

sidelites, and windows with fire-rating requirements up to 90 minutes (up

to 180 minutes in doors).

Features

• Fire-rated up to 90 minutes (up to 180 minutes in doors) with required

hose stream test

• Specially-floated glass-ceramic with surface applied 3M Scotchshield*

Ultra Film

• Transparent and wireless

• Withstands thermal shock

• Suited for use with standard fire-rated frames with the same rating

• Conforms to positive pressure test standards

• Environmentally-friendly glass-ceramic; produced without the use of toxins

• Can be used to construct insulated glazing units

General Characteristics

• Thickness: 3/16" (5mm)

• Weight: 2.5 lbs/ft2

• True color rendition

• Surface finish: mirror-like

• Maximum sheet sizes: Approximately 43" x 77"

• Impact rating: ANSI Z97.1 and CPSC 16CFR1201 (Cat. I and II)

Classified and labeled by Underwriters Laboratories, Inc. for the United

States and Canada with File-No. R22036. All fire tests performed in

accordance with UL 9, UL 10B, UL10C, UBC 7-2 (1997), UBC 7-4 (1997),

NFPA 252, NFPA 257, NFPA 80, ASTM E2010-01, ASTM E2074-00, ULC

CAN4-S104, and ULC CAN4-S106.

Note: This product is not considered a barrier to radiant heat and has not met the ASTM E-119 or UL 263 test standards. All listing information is subject to change. The current rating can be accessed in the UL directory under file #R22036 or upon request from SCHOTT. *3M is a trademark of the 3M Corporation For special component requirements, contact SCHOTT North America, Inc., 5530 Shepherdsville Road, Louisville, KY 40228 or phone (502) 657-4417.

Pyran® Platinum F

Fire- and Safety-Rated Glass-Ceramic

Labeling

After cutting, each lite of PYRAN® Platinum F fire- and safety-rated glassceramic

shall be permanently labeled according to code requirements

with product and manufacturer’s name, mark from the authorized testing

agency, fire rating, etc.

Storage & Handling

PYRAN® Platinum F fire- and safety-rated glass-ceramic should be

handled with care during transportation, storage, inspection, and installation.

It should be stored in dry conditions only and needs to be stacked

upright or at a slight angle. In addition, the panels must be separated by

an appropriate material, such as acid-free tissue paper, and the bottom

edge must be supported along its entire length.

Installation

PYRAN® Platinum F shall only be installed into fire-rated frame and window

assemblies carrying the same rating. Each panel should be inspected

carefully before installation, and any pieces with visible edge or surface

damage should be sorted out. All glazing components and the stop

height must be chosen according to the PYRAN® Platinum F UL classification.

The panel must be placed on calcium silicate or hardwood setting

blocks and glazed using PYRAN® Platinum F classified glazing tape, such

as closed cell PVC, Fiberfrax tape or Pemko FG3000S90. The installation

of the framed unit must comply with the frame supplier’s instructions.

PYRAN® Platinum F is a specially developed glass-ceramic, that fulfills the

fire and safety protection rating requirements. The production process

may create certain optical imperfections, such as bubbles or knots. Since

these do not generally impair the transparency or the technical performance

of the glass-ceramic, they do not represent cause for rejection or replacement.

Maintenance and Care

To maintain the aesthetics, it is important to keep the panel clean. A soft,

clean, non-abrasive cloth and a mild soap, detergent, or non-abrasive

window cleaning solution is suitable for cleaning. After cleaning rinse immediately

with clean water and remove any excess water from the panel

surface. Also, do not allow any metal or hard parts of the cleaning equipment

to come in contact with the panel surface.

For more information please contact: Protection SCHOTT North America, Inc. 5530 Shepherdsville Road Louisville, KY 40228 Phone: (502) 657-4417 Fax: (502) 966-4976 pyran@us.schott.com www.us.schott.com/pyran

Also Check Out:

Beveled Glass & Mirror

The beveling of edges creates a very elegant look and is used often on vanity mirrors and wall mirrors.

Decorative Glass 

In recent years there has been a growing trend in the use of decorative glass to create dramatic entryways. AIG is leading the industry with decorative glass options to make your home stand out.