PYRAN®Platinum L

Fire- and Safety-Rated Glass-Ceramic

Description

PYRAN® Platinum L is a fire-protection rated and impact safety-rated glazing

material with a thickness of approximately 3/8" (9 mm), a laminated

glass-ceramic with a transparent appearance. It is intended for use in safety-

rated locations such as door lites, transoms or sidelites, and windows

with fire-rating requirements up to 90 minutes (doors: up to 3 hours).

Features

• Fire-rated up to 90 minutes (up to 3 hours in doors) with required hose

stream test

• Laminated specially floated glass-ceramic

• Transparent and wireless

• Withstands thermal shock

• Suited for use with standard fire-rated frames with the same rating

• Conforms to positive pressure test standards

• Environmentally-friendly glass-ceramic; produced without the use of toxins

• Can be used to construct insulated glazing units

Also Check Out:

Beveled Glass & Mirror

The beveling of edges creates a very elegant look and is used often on vanity mirrors and wall mirrors.

Decorative Glass 

In recent years there has been a growing trend in the use of decorative glass to create dramatic entryways. AIG is leading the industry with decorative glass options to make your home stand out.

General Characteristics

• Thickness: Approximately 3/8" (9 mm)

• Weight: 4.0 lbs/ft2

• True color rendition

• Surface finish: mirror-like

• Maximum sheet sizes: Approximately 43" x 77"

• Impact rating: ANSI Z97.1 and CPSC 16CFR1201 (Cat. I and II)

• STC rating: Approximately 36 dB

Classified and labeled by Underwriters Laboratories, Inc. for the United States and Canada with File-No. R22036. All fire tests performed in accordance with UL 9, UL 10B, UL10C, UBC 7-2 (1997), UBC 7-4 (1997), NFPA 252, NFPA 257, NFPA 80, ASTM E2010-01, ASTM E2074-00, ULC CAN4-S104, and ULC CAN4-S106. Note: This product is not considered a barrier to radiant heat and has not met the ASTM E-119 or UL 263 test standards. All listing information is subject to change. The current listing can be accessed in the UL directory under file #R22036 or upon request from SCHOTT. For special component requirements, contact SCHOTT North America, Inc., 5530 Shepherdsville Road, Louisville, KY 40228 or phone (502) 657-4417.

PYRAN® Platinum L

Fire- and Safety-Rated Glass-Ceramic

Labeling

After cutting, each lite of PYRAN® Platinum L fire- and safety-rated glassceramic

shall be permanently labeled according to code requirements

with product and manufacturer’s name, mark from the authorized testing

agency, fire rating, etc.

Storage & Handling

PYRAN® Platinum L fire- and safety-rated glass-ceramic should be handled

with care during transportation, storage, inspection, and installation. It

should be stored in dry conditions only and needs to be stacked upright

or at a slight angle. In addition, the panels must be separated by an

appropriate material, such as soft pads made of cork and the bottom

edge must be supported along its entire length.

Installation

PYRAN® Platinum L shall only be installed into fire-rated frame and window

assemblies carrying the same rating. Each panel should be inspected

carefully before installation, and any pieces with visible edge or surface

damage should be sorted out. All glazing components and the stop

height must be chosen according to the PYRAN® Platinum L product

classification. The panel must be placed on calcium silicate or hardwood

setting blocks and glazed using PYRAN® Platinum L classified glazing

tape, such as closed cell PVC, Fiberfrax tape or Pemko FG3000590.

The installation of the framed unit must comply with the frame supplier’s

instructions.

PYRAN® Platinum L is a specially developed glass-ceramic, which fulfills the

fire protection rating requirements. The production process may create

certain optical imperfections, such as bubbles or knots. Since these do not

generally impair the transparency or the technical performance of the

glass-ceramic, they do not represent cause for rejection or replacement.

Maintenance and Care

To maintain the aesthetics, it is important to keep the panel clean. A soft,

non-abrasive cloth and a mild soap, detergent, or non-abrasive window

cleaning solution is suitable for cleaning. After cleaning rinse immediately

with clean water and remove any excess water from the panel surface.

Also, do not allow any metal or hard parts of the cleaning equipment to

come on contact with the panel surface.

For more information please contact: Protection SCHOTT North America, Inc. 5530 Shepherdsville Road Louisville, KY 40228 Phone: (502) 657-4417 Fax: (502) 966-4976 pyran@us.schott.com www.us.schott.com/pyran